SHLD_SECO_S02_STOP_S42


SHLD_SECO_S02_STOP_S42

None
manufacturer - Seal Corporation

Base

Type     None
Subtype  None
Size     None
Grade    None
Mass     1000kg
HP        250

SCItemShieldGeneratorParams

shield hp max           14584hp
shield hp regen           182.3hp/s
allocation max              0.5hp/s
allocation rate             0.1777hp/s
regen delay damaged         0s
regen delay downed         15s
harden factor               0.15
harden duration            45s
harden cooldown            45s
shield regen time          800s
shield down regen time     950s

EntityComponentPowerConnection

power base                    450pwr/s
power draw                   1418pwr/s
power overpower performance     0.1
power overclock performance     0.3
power overclock min             0.4
power overclock max             0.7
power up time                   7.5s
em ratio                        6em/pwr
em decay rate                   0.2

EntityComponentHeatConnection

temp min                     0
temp max                   700
temp overheat              650
temp recovery              550
temp cooling start         300
temp misfire min           300
temp misfire max           900
overpower heat               0
cooling rate                89.04762
recovery time            None
overclock threshold min      0
overclock threshold max      0
thermal conductivity         0.05
thermal energy draw      45000
thermal energy base      42619.05
surface area                 0.05
specific heat capacity       0.5
thermal mass              1000
temp ratio IR                6

SHealthComponentParams

dmg resist phys  1
dmg resist nrg   1
dmg resist dst   1
dmg resist heat  1
dmg resist bio   1

SDegradationParams

wear lifetime       20hours
wear initial ratio   0

Default equipment

json